bantu analisa ya....

5530 masuk mati, saya flash pake hwk
ini log nya
Code:
CMT 1ST Boot Err: Bad Resp RAPx, 
IMAGE : RM-504_32.0.007_007_000_U001.uda.fpsx
Process Failed, Repowering Mobile
yg ini pake usb
Code:
Insert USB Cable to Switched OFF Phone and Power ON
USB BOOT  : 60,07 [Rm-504] [2.2.0.3]
CMT ASICID: 000000010000022600010006400C192101051105
EM 1 ID   : 00000000
EM 1 ID   : 00000B22
CMT PUBID : 0A700115B77E005250F3A96D9870F62D205BA0D7
CMT MODE  : 00
CMT HASH  : B8C3ADECFC997FCD8081D3DEAF870B8C
CMT ROMID : 4B9B75103E691FF8
CMT 2ND Bt: RAPIDOv11_2nd.fg, Ver: 11.34.0
CMT 2ND Bt: SILO OK
CMT RMID0 : 00000000-00000000
CMT MCID0 : FFFF0000-00000000
CMT FLID0 : 00200040-00000031, St OneNAND-2G
CMT FLID1 : 00200040-00000031, St OneNAND-2G
CMT RQALG : XSR 1.5
CMT 2ND Boot OK
CMT ALGO  : RAPIDOv11_XSR15_alg.fg, Ver: 11.34.0
CMT KSIG0 : F2B05364E563A348608C1C3C9E54FE42AAAA1ACF
CMT ALG Boot OK
IMAGE : RM-504_40.0.003_prd.core.C00
CMT NAND Erase Area: 0x00040000-00082FFF
CMT NAND Erase Area: 0x00083400-003FFFFF
CMT NAND Erase Area: 0x00400000-007FFFFF
CMT NAND Erase Area: 0x00800000-00D5FFFF
CMT NAND Erase Area: 0x00D60000-09E5FFFF
CMT NAND Partition Format
CMT FLASH ERASE OK, Time: 00:01
ERR: CMT FLASH WRITE PROG_DATA_REQ Fail, Time: 00:26
Process Failed, Repowering Mobile
yg ini dg mxkey

Code:
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 2], SN: C08422FF
Using device: HTI, FW ver: 00.50, SN: 00011EFD
Connection status: OHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 
Module ver: 1.0.0.20814(05-05-2012), Library ver: 1.0.0.14060(05-05-2012)
ERROR: Packet Error(0xAA), code 0xC0000002
ERROR: Packet Error(0xAA), code 0xC0000002
Error details:
 Bad contact, TX line remains low !
VCC_PH  BSI  TX  RX  RX2  CLK
     1    0   0   1    1    0
ERROR: bootstrap failed!
Task failed at (0800000A)!!!
 Last RX buffer: 02 00 00 C0

kira kira harus di apahan ini HP

Similar Threads ::