One click downgrade repair for BB5 added. Works on phones which after downgrade failing to boot (hang up on NOKIA screen) - this includes phones which dont had patched 308 before flashing. No need to full erase, etc. Just one click and 20 seconds, fast, and safe.
Code:
Booting RAP...
CMT_SYSTEM_ASIC_ID:     000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:         00000232
CMT_EM_ASIC_ID:         00000353
CMT_PUBLIC_ID:         22C000133A0B6E561E7820319A02ED6A64141878
CMT_ASIC_MODE_ID:     00
CMT_ROOT_KEY_HASH:     BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:         191EC665DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 10
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D6D07E588DC4E06DEE7012A3C0ECC4E35D3CE263
CMT NPC Ok
CMT NPC Erased
Restarting MCU...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 9 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
[308,5] Reading 10 bytes
[308,6] Reading 1 bytes
[308,7] Reading 1 bytes
[308,8] Reading 1 bytes
[308,9] Reading 40 bytes
PM Read OK, Time taken 1.968s
Simlock backup OK
Backup simlock thread finished, continuing...
Applying downgrade patch...
Downgrade patch OK!
CMT_SYSTEM_ASIC_ID:     000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:         00000232
CMT_EM_ASIC_ID:         00000353
CMT_PUBLIC_ID:         22C000133A0B6E561E7820319A02ED6A64141878
CMT_ASIC_MODE_ID:     00
CMT_ROOT_KEY_HASH:     BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:         191EC665DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 10
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D6D07E588DC4E06DEE7012A3C0ECC4E35D3CE263
Restoring NPC...
Restarting MCU...
BB5 Downgrade Repair finished
- SX4 Bypass added. If phone can't be authorized due to corrupted superdongle key or server problems, you can use this to write protected PM Records (1, 309). No need to full erase, etc. Fast and safe.
Code:
[1,0] Written, Length: 114 bytes, Status: Not accepted, Code: 19
[1,2] Written, Length: 98 bytes, Status: Not accepted, Code: 19
[1,4] Written, Length: 110 bytes, Status: Not accepted, Code: 19
[1,6] Written, Length: 98 bytes, Status: Not accepted, Code: 19
[1,8] Written, Length: 110 bytes, Status: Not accepted, Code: 19
[1,13] Written, Length: 98 bytes, Status: Not accepted, Code: 19
[1,16] Written, Length: 86 bytes, Status: Not accepted, Code: 19
[1,18] Written, Length: 86 bytes, Status: Not accepted, Code: 19
[1,20] Written, Length: 86 bytes, Status: Not accepted, Code: 19
[1,25] Written, Length: 4 bytes, Status: Not accepted, Code: 19
[1,29] Written, Length: 6 bytes, Status: Not accepted, Code: 19
[1,34] Written, Length: 80 bytes, Status: Not accepted, Code: 19
[309,0] Written, Length: 4 bytes, Status: Not accepted, Code: 19
[309,1] Written, Length: 2 bytes, Status: Not accepted, Code: 19
[309,2] Written, Length: 12 bytes, Status: Not accepted, Code: 19
[309,4] Written, Length: 12 bytes, Status: Not accepted, Code: 19
[309,5] Written, Length: 12 bytes, Status: Not accepted, Code: 19
[309,7] Written, Length: 12 bytes, Status: Not accepted, Code: 19
[309,8] Written, Length: 12 bytes, Status: Not accepted, Code: 19
[309,17] Written, Length: 12 bytes, Status: Not accepted, Code: 19
[309,22] Written, Length: 12 bytes, Status: Not accepted, Code: 19
Write PM OK


Bypassing SX4...
Booting RAP...
CMT_SYSTEM_ASIC_ID:     000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:         00000232
CMT_EM_ASIC_ID:         00000353
CMT_PUBLIC_ID:         22C000133A0B6E561E7820319A02ED6A64141878
CMT_ASIC_MODE_ID:     00
CMT_ROOT_KEY_HASH:     BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:         191EC665DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 10
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D6D07E588DC4E06DEE7012A3C0ECC4E35D3CE263
CMT NPC Ok
CMT NPC Erased
Restarting MCU...
[1,0] Written, Length: 114 bytes, Status: OK
[1,2] Written, Length: 98 bytes, Status: OK
[1,4] Written, Length: 110 bytes, Status: OK
[1,6] Written, Length: 98 bytes, Status: OK
[1,8] Written, Length: 110 bytes, Status: OK
[1,13] Written, Length: 98 bytes, Status: OK
[1,16] Written, Length: 86 bytes, Status: OK
[1,18] Written, Length: 86 bytes, Status: OK
[1,20] Written, Length: 86 bytes, Status: OK
[1,25] Written, Length: 4 bytes, Status: OK
[1,29] Written, Length: 6 bytes, Status: OK
[1,34] Written, Length: 80 bytes, Status: OK
[309,0] Written, Length: 4 bytes, Status: OK
[309,1] Written, Length: 2 bytes, Status: OK
[309,2] Written, Length: 12 bytes, Status: OK
[309,4] Written, Length: 12 bytes, Status: OK
[309,5] Written, Length: 12 bytes, Status: OK
[309,7] Written, Length: 12 bytes, Status: OK
[309,8] Written, Length: 12 bytes, Status: OK
[309,17] Written, Length: 12 bytes, Status: OK
[309,22] Written, Length: 12 bytes, Status: OK
Write PM OK
Booting RAP...
CMT_SYSTEM_ASIC_ID:     000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:         00000232
CMT_EM_ASIC_ID:         00000353
CMT_PUBLIC_ID:         22C000133A0B6E561E7820319A02ED6A64141878
CMT_ASIC_MODE_ID:     00
CMT_ROOT_KEY_HASH:     BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:         191EC665DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 10
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D6D07E588DC4E06DEE7012A3C0ECC4E35D3CE263
Restoring NPC...
Restarting MCU...
SX4 Bypass Finished
- DCT4 "SIMLOCK SERVER" Relock fixed (5000, 2630). Thx to wgmmmx for
bugreport.
- Check Flashing Bus for BB5 Added
- Fixed registration process, when blank arguments are used
- Fixed registration process, when invalid input data are used (i.e. special Russian chars)
- Fixed invalid date/time problem while box maintenance (upgrade) on some timezones
- Added in "Settings/General" option to skip box selftests (use when box selftest subsystem is damaged)
- Resellers list during registration is now displayed in ascending order
- Skin Stack updated to v6.21
- Added DCT4plus new security unlock patches
RH-116 7070p v6.82 - new security
RM-258 2760 v6.82 - new security
RM-298 2630 v6.82 - new security
RM-340 2600c v6.82 - new security
RM-362 5000d v5.27 - new security
RM-362 5000d v5.45 - new security
RM-392 2680s v6.82 - new security
RM-394 1680c v6.82 - new security
- USB Drivers updated to 1.0.0.3, this no more conflicting MicroBox
- Versions snap
Installer v1.01
Main x86 Application v1.0.0.6634
x86 Memory Manager v4.92
Native USB Drivers v1.0.0.3
USB-COM Stack Drivers v1.0.0.0
Onboard Secure Bootloader v2.08
Onboard Main Nokia Application v1.00
Onboard Security Card Revision v1.09
Nokia Connectivity Cable Drivers v7.1.8.0
BB5 USB/FPIF Single Line/FPIF DualLine v20090315 (Mixed)
DCT4 FPIF Single Line/USB v20090315 (v7.4.77.0)
DCT4 Unlock Patches v20090326
Communication Stack SSLv3-keys-06092008
Skin Stack v6.21

Download link: http://www.cyclonebox.com/downloads/...xInstaller.exe ( will be avaiable in 10 min, still uploading )

try...up...!!


Similar Threads ::